Sliding Out The Process Unit - Canon iR C6800 Series Service Manual

Once you have released the hopper assembly, toner
can spill over the toner bottle supply mouth of the
hopper assembly cover. Be sure to wipe off any such
toner.
F-7-434
3) Remove the 3 screws [1].
[1]
F-7-435
4) Close the black toner supply cover [1]; then, fully
open the hopper assembly [2].
[2]
[1]
F-7-436
7.11.13.4 Sliding Out the
Process Unit
1) Disconnect the 5 connectors [1] found at the upper
right.
[1]
[1]
F-7-437
2) Disconnect the 5 connectors [1] found at the upper
left.
[1]
[1]
F-7-438
3) After freeing the high voltage connector cable [1]
from the 2 wire saddles [2], fix the cable in place using
the cable hook [3].
[2]
[1]
F-7-439
Chapter 7
0004-1093
[1]
[3]
7-145