Canon iR C6800 Series Service Manual page 1013

14.3.27 E100
Code Detail
E100 The BD is not detected.
0001
The BD signal is not detected when the polygon
scanner has been driven for a specific period of time.
0002 The BD signal is not detected white the polygon
scanner is rotating stably.
14.3.28 E110
Code Detail
E110
0001
0002
0003
Cause/Particulars of detection
Cause/Particulars of detection
There is a scanner motor error.
The FG signal is not detected within a specific period of
time after the polygon scanner has been driven.
The FG signal is not detected within a specific period of
time after the polygon scanner has been driven.
(the interval from when the motor starts to rotate and
VLock=H is more than a specific length of time)
The FG signal is not detected white the polygon scanner is
rotating stably.
(VLock goes off when VLock=H and PLock=L)
T-14-29
Turn off the main power, and check the DC controller PCB
and the 24V system fuse; then, turn on the main power.
Turn off the main power, and check the DC controller PCB
and the 24V system fuse; then, turn on the main power.
T-14-30
Turn off the main power, and check the
DC controller PCB and the 24V system
fuse; then, turn on the main power.
Turn off the main power, and check the
DC controller PCB and the 24V system
fuse; then, turn on the main power.
Turn off the main power, and check the
DC controller PCB and the 24V system
fuse; then, turn on the main power.
Chapter 14
0004-3216
Remarks
0004-3219
Remarks
14-29