T2 Temp; Blnk Thp - Canon iR C6800 Series Service Manual

15.6.1.1.19 <T2 TEMP>
Attention
Settings
15.6.1.1.20 <BLNK THP>
Attention
Settings
15.6.1.1.21 <CD IDL T>
Attention
settings range
T-15-266
Use it to switch over the heavy paper 2 down sequence tables.
The new setting will not be valid until the power switch has been
turned off and then on.
0: default
1: priority on fixing
2: priority on productivity
at time of shipment/upon RAM initialization: 0
T-15-267
Use it to switch over leading edge margins for heavy paper 1/2 (color
only; remedy against horizontal lines along leading edge).
The new setting will not be valid until the power switch has been turned
off and then on.
0: default margin
1: 7 mm (leading edge margin median value)
at time of shipment/upon RAM initialization: 0
T-15-268
Use it to adjust the duration of idle rotation for IDL T (color
developing assembly YMC; otherwise executed first in the
morning in a high humidity environment).
a setting toward ' ' will reduce the downtime associated with initial
multiple rotation, but will not compensate fully for changes in
density.
a setting toward '+' will fully compensate for changes in density,
but will increase downtime associated with initial multiple rotation.
The new setting will not be valid until the power switch has been
turned off and then on.
3 to +6 (unit: 5 sec)
at time of shipment/upon RAM initialization; 0
Chapter 15
0005-6687
0005-6690
0005-6693
15-151