Removing The Itb Cleaning Unit; Remove The Patch Image Reading Unit - Canon iR C6800 Series Service Manual

[2]
[1]
F-7-1120
7.11.41.8 Removing the ITB
Cleaning Unit
1) Remove the 2 screws [1]; then, slide the ITB
cleaning unit [2] in the direction of the arrow to
detach.
[1]
F-7-1121
7.11.41.9 Remove the Patch
Image Reading Unit
1) Shift the arm [1] shown in the figure to lock it in
place; thus releasing the roller (both front and rear).
[3]
0003-2643
[2]
[1]
0003-9010
[1]
F-7-1122
2) Stand the intermediate transfer unit by fitting its 2
pints [2] in the 2 holes of the fixing/feeding assembly.
Make sure that the ITB cleaner unit has been
already removed.
[2]
[1]
F-7-1123
3) Disconnect the connector [1], and free the cable [3]
from the 3 cable clamps [2].
4) Remove the 2 screws [4], and detach the patch
image reading unit [5].
[4]
[5]
F-7-1124
Chapter 7
[2]
[1]
[3] [1]
[2]
7-285