Canon iR C6800 Series Service Manual page 1096

Hide thumbs Also See for iR C6800 Series:

Table of Contents

Use it to check the output value of the developing DC voltage (Y) generated last.

Use it to check the output value of the developing DC voltage (M) generated last.

Use it to check the output value of the developing DC voltage (C) generated last.

Use it to check the output value of the developing DC voltage (K) generated last.

Uses it to indicate the value (P wave) measured of the dark current at time of ATR control.

Uses it to indicate the value (S wave) measured of the dark current at time of ATR control.

Use it to check the value (S wave) detected of the intensity of light from the background (drum) at time of ATR

Use it to check the history of measurements taken by the ATR sensor (Y; latest 8 measurements).

Use it to check the history of measurements taken by the ATR sensor (M; latest 8 measurements).

Use it to check the history of measurements taken by the ATR sensor (C; latest 8 measurements).

Use it to indicate the history of the results of patch image detection (Y; latest 8).

Use it to indicate the history of the results of patch image detection (M; latest 8).

Use it to indicate the history of the results of patch image detection (C; latest 8).

Use it to check the D/A settings of the LED for the path image sensor.

Use it to indicate the present level of the density reference signal for the Y developing assembly.

Use it to indicate the present level of the density reference signal for the M developing assembly.

Use it to indicate the present level of the density reference signal for the C developing assembly.

Use it to indicate the measurement of the background at time of analog patch operation (S wave component).

Use it to indicate the measurement of the background at time of analog patch operation (P wave component).

Chapters

Table of Contents