Removing The Patch Image Reading Unit; Removing The Patch Image Reading Sensor Shutter Solenoid - Canon iR C6800 Series Service Manual

Chapter 7
7.11.42.9 Removing the Patch
Image Reading Unit
1) Shift the arm [1] shown in the figure to lock it in
place; thus releasing the roller (both front and rear).
[1]
F-7-1153
2) Stand the intermediate transfer unit by fitting its 2
pints [2] in the 2 holes of the fixing/feeding assembly.
Make sure that the ITB cleaner unit has been
already removed.
[2]
[1]
F-7-1154
7-292
0004-5900
[2]
[1]
3) Disconnect the connector [1], and free the cable [3]
from the 3 cable clamps [2].
4) Remove the 2 screws [4], and detach the patch
image reading unit [5].
[4]
[5]
F-7-1155
7.11.42.10 Removing the Patch
Image Reading
Shutter Solenoid
1) Remove the 4 screws [1].
[1]
F-7-1156
2) Disconnect the connector [1], and detach the patch
image reading sensor shutter solenoid [2].
[2]
F-7-1157
[3] [1]
[2]
Sensor
0004-5880
[1]