5) Remove the screw [1] from the front side.
F-8-174
6) Remove the screw [1] from the rear.
7) Detach the side plate [2].
[2]
[1]
F-8-175
8) Disconnect the connector [1].
F-8-176
[1]
[1]
9) Disconnect the 2 connectors [1], and open the wire
guide [2].
10) Remove the screw [3], and slide the horizontal
registration unit [4] in the direction of the arrow to
detach.
[2]
[1]
[1]
F-8-177
8.11.22 Registration Motor
8.11.22.1
Removing
Fixing/Feeding Driver PCB
1) Open the front cover.
2) Slide out the fixing/feeding assembly.
3) Remove the screw [1], and detach the handle [2].
4) Remove the 2 screws [3], and detach the fixing/
feeding front cover [4].
[1]
[2]
[3]
F-8-178
Chapter 8
[4]
[3]
the
0003-7031
[4]
8-79