Points To Note When Mounting The Fixing Lower Thermistor - Canon iR C6800 Series Service Manual

Chapter 9
2) Remove the 2 screws [1], and detach the inlet guide
[2].
[1]
[2]
F-9-101
3) Disconnect the connector [1], and free the harness
[2] from the 2 wire saddles [3].
[1] [3]
F-9-102
4) Free the harness [1] from the wire saddle [2].
5) Remove the 2 screws [3], and detach the 2 holders
[4].
[1]
[4] [3]
F-9-103
9-40
[1]
[2]
[2]
[4]
6) Remove the 2 screws [1], and free the harness [2]
from the 2 wire saddles [3].
[2]
[1]
[3]
F-9-104
9.6.6.3 Points to Note When
Mounting the Fixing Lower
Thermistor
After mounting the thermistor, make sure of the
following:
The surface of the thermal switch [1] must be parallel
to the fixing roller. (Check to be sure by shining the
thermal switch with a pen light.) Otherwise, re mount
it.
[1]
F-9-105
OK NG
F-9-106
[1]
[3]
0005-5546
NG