Points To Note When Mounting The Fixing Thermal Switch - Canon iR C6800 Series Service Manual

2) Disconnect the connector [1], and free the harness
[2] from the wire guide [3].
3) Remove the 2 fastons [4].
4) Remove the screw [5], and detach the thermal
switch [6].
[1]
[3]
[2]
[4] [6]
F-9-129
9.6.8.3 Points to Note When
Mounting the Fixing Thermal
Switch
After mounting the thermal switch, make sure of
the following:
The surface of the thermal switch [1] must be parallel
to the fixing roller. (Check to be sure by shining the
thermal switch with a pen light.) Otherwise, re mount
it.
[1]
F-9-130
OK NG NG NG
F-9-131
[5]
0004-5055
NG
9.6.9 Fixing Locking Thermal Switch
9.6.9.1 Removing the Fixing
Assembly
1) Open the front cover.
2) Slide out the fixing/feeding assembly.
3) Push the leaf springs [1] found at the left and right
to slide farther out the fixing/feeding assembly [2].
[2]
[1]
F-9-132
4) Open the reversal delivery cover [1] and the middle
cover [2].
[1]
F-9-133
Chapter 9
0003-2551
[1]
[2]
9-45