Canon iR C6800 Series Service Manual page 1350

Chapter 16
5) Click [OK] to start connection.
Service Support Tool DLM4 (ver.1.81En) Checking the Start
Selected Model and Unit
Model
"If the following preparations have been made, click [OK]."
""
"Turn off the machine."
"Connect the PC and the machine using a network cable."
"Turn on the machine, and start the download mode."
6) When the machine has made a connection and brings up the following screen, click [OK].
Service Support Tool DLM4 (ver.1.81En) Connecting to the Machine
Selected Model and Unit
Model
Connected Model and Unit
Model
List of System Software for the Target of Connection
The information needed for the job has been obtained.
Check the indicated descriptions, and press [OK].
16-44
iR XXXX Unit
To Unit Selection
Screen
iR XXXX Unit
iR XXXX Unit
L a n g u a g e C o u n t r y / R e g i o n
J a p a n e s e J a p a n
Connected to 172.16.1.100
SYSTEM
Set host name
F-16-57
Connected to 172.16.1.100
SYSTEM
SYSTEM
V e r s i o n S t a t e
0 1 . 2 5 A
OK
F-16-58
OK