Canon iR C6800 Series Service Manual page 1014

Chapter 14
14.3.29 E197
Code detail
E197 There is an error in the communication with the fixing feed PCB.
In the course of initializing communication between
0002
the DC controller and the fixing/feeding unit, as many
as 10 communication errors occur continuously.
0003 Following the end of initialization of the
communication between the DC controller and the
fixing/feeding unit, as many as 10 communication
errors occur continuously.
0004 At the start of drum initial multiple rotation, there is no
signal indicating the start of 24V in the fixing assembly
in the communication between the DC controller and
the fixing/feeding unit.
14.3.30 E202
Code Detail
E202
0001
0002
14.3.31 E225
Code Detail
E225
0001
14-30
Cause/Particulars of detection
Cause/Particulars of detection
There is an HP error.
An error is found during the forward trip of the HP search.
The scanner HP sensor is faulty. The scanner motor is faulty.
The reader controller is faulty.
An error is found during the return trip of the HP search.
The scanner HP sensor is faulty. The scanner motor is faulty.
The reader controller PCB is faulty.
Cause/Particulars of detection
The lamp has blown.
The level of shading is lower than
specified.
T-14-31
Turn off the main power, and check the DC
controller PCB wiring and the 24V system
fuse; then, turn on the main power.
Turn off the main power, and check the DC
controller PCB wiring and the 24V system
fuse; then, turn on the main power.
Turn off the main power, and check the DC
controller PCB wiring and the 24V system
fuse; then, turn on the main power.
T-14-32
T-14-33
Check the harness connector for connection. Check the scanning
lamp (xenon), inverter, and reader controller PCB.
Remarks
Remarks
Check the harness connector for
connection; then, as necessary, replace
the faulty part.
Check the harness connector for
connection; then, as necessary, replace
the faulty part.
Remarks
0005-8240
0004-3270
0004-3275