Removing The Switch Pcb - Canon iR C6800 Series Service Manual

Chapter 10
10.5.14.3 Removing Pickup
Driver PCB
1) Disconnect the 7 connectors [1], remove the 5
screws [2], and free the PCB support [3]; then, detach
the pickup drive PCB [4].
[2] [1]
[1]
[2]
[1]
[2] [4]
F-10-96
10.5.15 Switch PCB
10.5.15.1 Removing the Rear
Cover (lower)
1) Remove the 7 screws [1], and detach the rear cover
(lower) [2].
1] 2]
1]
F-10-97
10-38
0003-5797
[3]
[1]
[2]
[1]
[2]
0003-6691
1]
10.5.15.2 Removing the Left
Cover (lower)
1) Remove the 2 grip covers [1].
2) Remove the 6 screws [2], and detach the left cover
(lower) [3].
2] 1] 2]
2] 3]
F-10-98
10.5.15.3 Removing the Switch
PCB
1) Disconnect the connector [1].
F-10-99
0003-6692
1] 2]
2]
0003-6693
[1]