1Tr Gai2; 1Tr Ofs2 - Canon iR C6800 Series Service Manual

15.4.1.11.6 <1TR COFS>
Method of adjustment
Range of adjustment
15.4.1.11.7 <1TR GAI2>
Method of adjustment
Range of adjustment
15.4.1.11.8 <1TR OFS2>
Method of adjustment
Range of adjustment
T-15-99
Use it to correct the constant current for the primary transfer high
voltage PCB. (intercept)
if you have initialized the RAM on the DC controller PCB or replaced
the DC controller PCB, enter the value indicated on the service label.
if you have replaced the high voltage PCB, enter the value indicated
on the label attached to the PCB.
200 to 0 (unit: 0.1 yA)
at time of shipment: factory measurement /upon RAM
initialization: 102
T-15-100
Use it to correct the constant voltage output for the transfer high voltage PCB.
2 (slope)
if you have initialized the RAM on the DC controller PCB or replaced the DC
controller PCB, enter the value indicated on the service label.
if you have replaced the high voltage PCB, enter the value indicated on the
label.
0 to 1000
at time of shipment: factory adjustment value
upon RAM initialization: 492
T-15-101
Use it to correct the constant voltage output for the primary transfer high
voltage PCB 2. (intercept)
if you have initialized the RAM on the DC controller PCB or replaced the
DC controller PCB, enter the value indicated on the service label.
if you have replaced the high voltage PCB, enter the value indicated on
the label attached on the PCB.
100 to 0 (unit: V)
at time of shipment: factory adjustment value
upon RAM initialization: 442
Chapter 15
0005-6890
0005-6891
0005-6892
15-85