Points To Note When Mounting The External Heat Thermistor; Fixing Thermal Switch - Canon iR C6800 Series Service Manual

5) Remove the 2 screws [1], and detach the thermistor
[2] from the thermistor mounting plate [3].
[1]
[2] [3]
F-9-118
9.6.7.3 Points to Note When
Mounting the External Heat
Thermistor
After mounting the thermistor, make sure of the
following:
The surface of the thermal switch [1] must be parallel
to the fixing roller. (Check to be sure by shining the
thermal switch with a pen light.) Otherwise, re mount
it.
F-9-119
OK NG
F-9-120
0005-5547
[1]
NG

9.6.8 Fixing Thermal Switch

9.6.8.1 Removing the Fixing
Assembly
1) Open the front cover.
2) Slide out the fixing/feeding assembly.
3) Push the leaf springs [1] found at the left and right
to slide farther out the fixing/feeding assembly [2].
[2]
[1]
F-9-121
4) Open the reversal delivery cover [1] and the middle
cover [2].
[1]
F-9-122
Chapter 9
0003-2550
[1]
[2]
9-43