7.11.13.7 Removing the
Photosensitive Drum Cleaner
End Scraper
1) Detach the double sided adhesive tape (2 strips) of
the end scraper [2].
[1]
F-7-455
Points to Note When Mounting the End Scraper
Be sure to clean the surface from which the double
sided tape has been removed with alcohol so that it is
free of adhesive.
7.11.14 Hopper Assembly
7.11.14.1 Removing the Right
Cover (upper)
1) Remove the 2 screws [1], and detach the right cover
(upper) [2].
[1]
F-7-456
0004-1089
[1]
0003-8253
[2]
7.11.14.2 Releasing the Front
Cover
1) Open the front cover.
2) While pulling on the grip [1], fully open the manual
feed cover [2] to the front.
[1]
F-7-457
If a side paper deck exists, remove the 2 screws [1]
and the latch plate (front)
[2]
F-7-458
3) Slide out the fixing/feeding assembly
4) Remove the 2 screws [1], and detach the process
unit cover [2].
[2]
F-7-459
Chapter 7
0003-2466
[2]
[1]
[1]
7-149