Chapter 9
9.6.2.3 Removing the Fixing
Roller
1) Remove the screws [1], and pull out the pin while
pushing down on the fixing assembly.
[1]
F-9-40
2) Remove the screw [1], and pull out the pin [2]; then,
open the fixing assembly.
[1]
[2]
F-9-41
3) Remove 2 screws [1], and detach the upper inlet
guide [2].
[1]
[2]
F-9-42
9-28
0003-3904
[2]
4) Remove the 2 wires [1], and detach the fixing roller
[2] together with the gear and the bearing.
F-9-43
[2]
[1]
F-9-44
5) Remove the ring [1], gear [2], bush [3], and bearing
[4] from the front in the order indicated.
[4]
[3]
[2]
F-9-45
[1]
[1]