Canon iR C6800 Series Service Manual page 1342

Chapter 16
In the case of version 2.01 of the SST, the notation 'Skip' is replaced by the notation 'Select Again'. The response,
however, will be the same.
Service Support Tool DLM4 (ver.2.01En) Selecting Disk Partition
Connected Model and Unit
Model iR XXXX
List of System Software for the Target of Connection
L a n g u a g e C o u n t r y / R e g i o n
E n g l i s h U S A
The selected systen has alreadybeen saved
S k i p
Selected Version
Language Country/Region
English USA
F-16-45
B 5) Click [Start Batch Download].
Service Support Tool Ver. 2.01E (DLM0) Batch Download Control Screen
Batch download list
"iR XXXX Ver2.01"
"Common to C-Boot and N-Boot"
Job
Wait "Turn off the copier, then turn on...
Download iR XXXX_SYSTEM_USen2101
Download iR XXXX_Language_XXja2101
Download iR XXXX_Language_XXen2101
Download iR XXXX_DCON_XXxx2007
Wait "Turn off the copier, then turn on...
Download iR XXXX_RUI_XXja1011
Interface
Network
Device IP:
172.16.1.100
To Unit Selection
Screen
F-16-46
16-36
Unit SYSTEM
Ve r s i o n
0 1 . 2 5
Version
01.25
Previous Screen
Path
C:\ServTool\iR XXXX\RUI\XXjav1011\iR XXXX
Confirm firmware versions
Same Ver:Skip/Ver down:Confirm
Confirm
Start Batch Download
172.16.1.100
S t a t e
A
S t a r t
Start
Overwrite