12.8.2 Adjusting the Manual
Feed Pickup Horizontal
Registration
Make copies using the manual feed tray as the source
of paper, and check to make sure that the left/right
margin is as indicated.
if not, make the following adjustments:
1) Loosen the screw [1], and move the position of the
slide guide [2] to adjust the horizontal registration.
[2]
[1]
F-12-98
2) Check to make sure that the left/right margin of the
prints is as indicated.
3) Tighten the screw.
12.8.3 Adjusting the Front
0003-9955
Make prints using the right deck and left deck as the
source of paper, and check to be sure that the left/
right margin is as indicated:
if not, make the following adjustments:
1. Adjusting the Left/Right Margin for the Left
Deck
1) Push the release button, and slide out the left deck.
2) Using a flat bladed screwdriver, detach the left face
cover [1].
F-12-99
3) Loosen the 2 screws [1], and insert a screwdriver
[2] through the opening of the left front stay; then, turn
the adjusting screw to adjust the left/right margin.
F-12-100
Deck Pickup Horizontal
Registration
[1]
[1]
Chapter 12
0003-9957
[2]
12-47