Points To Note When Removing The Fixing Roller; Pressure Roller - Canon iR C6800 Series Service Manual

When mounting the gear you have removed
previously, be sure that the protrusion [1] of the gear
is toward the front of the machine.
F-9-46
6) Remove the ring [2], spacer [3], bearing [4], and
bush [5] from the rear.
[1]
[5]
[4]
F-9-47
9.6.2.4 Points to Note When
Removing the Fixing Roller
When mounting the inlet upper guide [1], be sure to
place print paper [2] under the edge of the guide.
[1]
[3]
[2]
0005-9439
To detach the paper after the work, go thorough the
following sequence: close the fixing assembly, while
pushing the fixing assembly downward, fit 2 pins,
tighten the screws, and then pull on the paper to
detach.
[2]
[1]
F-9-48

9.6.3 Pressure Roller

9.6.3.1 Removing the Fixing
Assembly
1) Open the front cover.
2) Slide out the fixing/feeding assembly.
3) Push the leaf springs [1] found at the left and right
to slide farther out the fixing/feeding assembly [2].
[2]
[1]
F-9-49
Chapter 9
0003-3910
[1]
9-29