Removing The Idler Roller - Canon iR C6800 Series Service Manual

2) Stand the intermediate transfer unit by fitting its 2
pints [2] in the 2 holes of the fixing/feeding assembly.
Make sure that the ITB cleaner unit has been
already removed.
[2]
[1]
F-7-990
3) Disconnect the connector [1], and free the cable [3]
from the 3 cable clamps [2].
4) Remove the 2 screws [4], and detach the patch
image reading unit [5].
[4]
[5]
F-7-991
[2]
[1]
[3] [1]
[2]
7.11.36.10 Removing the Idler
Roller
1) Remove the screw [1], and detach the pre transfer
guide [2].
[2]
F-7-992
Chapter 7
0003-2664
[1]
7-259