Removing The Relay Pcb; Removing The Dc Relay - Canon iR C6800 Series Service Manual

Chapter 10
10.5.8.2 Removing the Relay
PCB
1) Disconnect the 20 connectors [1], and remove the 6
screws [2]; then, detach the relay PCB [3].
[2] [1] [2] [1]
[3]
[1]
[2]
F-10-61
10.5.9 DC Relay
10.5.9.1 Removing the Rear
Cover (lower)
1) Remove the 7 screws [1], and detach the rear cover
(lower) [2].
1] 2]
1]
F-10-62
10-30
0003-6696
[2]
[1]
[1]
[2]
[1]
0004-1301
1]
10.5.9.2 Removing the DC
Relay
1) Remove the 8 fastons [1].
2) Pull the leaf spring [2] to the front, and detach the
relay [3].
1]
1]
1]
F-10-63
10.5.10 HV1 PCB
10.5.10.1 Removing the Rear
Cover (upper)
1) Free the cable [2] from the 2 cable clamps [1].
2) Remove the 2 screws [3].
[3]
[2] [1]
F-10-64
0004-1296
3]
2]
0003-8318