Fan - Canon iR C6800 Series Service Manual

Chapter 15
15.5.1.9.3 <FAN>
Operation
15.5.1.9.4 <FAN ON>
Operation
15-122
T-15-196
Use it to select the clutch whose operation you want to check.
(range: 1 through 10; 4 through 10 are reserved)
(range: 1 through 10; 4 through 10 are reserved)
1)Select the time.
2)Enter the code of the selected clutch using the keypad.
1:primary charging suction fan (FM1)
2:primary charging exhaust fan (FM2)
3:feed fan 1 (FM3), feed fan 3 (FM11)
4:feed fan 2 (FM4), feed fan 4 (FM12)
5:fixing heat discharge fan (FM5)
6:delivery cooling fan 1 (FM6)
7:process unit cooling fan (FM7)
8:reserved
9:power supply cooling fan (FM9)
10:delivery cooling fan 2 (FM10)
4 to 10:reserved
3)Press the OK key.
4)Press [CL ON] to start checking the operation.
T-15-197
Use it to start a check on the selected fan.
1)Select the item, and press the OK key so that the following will take place:
on at full speed for 10 sec > on for half speed for 10 sec > standby
0005-6497
0005-6498