Itb Home Position Sensor Pcb; Secondary Transfer Roller Shift Motor; Removing The Itb Home Position Sensor (Right, Left) - Canon iR C6800 Series Service Manual

7.11.29 ITB Home Position Sensor
PCB
7.11.29.1 Removing the ITB Home
Position Sensor (right, left)
1) Detach the ITB.
2) Remove the screws [1] (2 pc. each), and disconnect
the connectors [2] (1 pc. each); then, detach the ITB
home position sensor (right) [3] and the other ITB
home position sensor (left) [4].
[4] [2]
[1]
F-7-825
If you are replacing the ITB home position sensor
(right, left), take care to avoid touching the sensor
widow; otherwise, wrong detention can occur.
7.11.30 Secondary Transfer Roller
Shift Motor
7.11.30.1 Secondary Transfer
Roller Shift Motor
1) Fully slide out the fixing/feeding assembly.
2) Remove the 24 screws [1], and disconnect the
connector [2]; then, detach the secondary transfer cam
assembly [3].
0002-6353
[2] [3]
[1]
0002-6348
[2]
[3]
[1]
F-7-826
3) Remove the 2 screws [1], and detach the secondary
roller shift motor [3] from the secondary transfer cam
assembly [2].
[1]
[3]
F-7-827
Chapter 7
[1]
[2]
7-225