3) If there is any toner [3] on the surface of the
intermediate transfer belt, dry wipe it with lint free
paper.
[3]
F-7-960
When you remove the transfer cleaner drive
assembly, the ITB cleaning blade [1] is likely to come
into contact with the intermediate transfer belt by the
work of a spring, causing toner [2] to deposit on the
belt surface in the form of lines. The toner can then be
forced against the photosensitive drum by the primary
transfer assembly, thus affecting the photosensitive
drum cleaning blade [3].
[2]
[1]
F-7-961
[3]
7.11.35.8 Removing the ITB
Cleaning Unit
1) Remove the 2 screws [1]; then, slide the ITB
cleaning unit [2] in the direction of the arrow to
detach.
[1]
F-7-962
7.11.35.9 Removing the ITB
Scoop Up Sheet
1) Remove the 2 screws [1], and detach the ITB
scoop up sheet [2].
[1]
F-7-963
Chapter 7
0003-6738
[2]
[1]
0003-6737
[2]
7-253