Key Chk; Touchchk - Canon iR C6800 Series Service Manual

Chapter 15
15.5.1.8.5 <KEY CHK>
Method of operation
Numbers/Names of the Keys
Key
0 to 9, #, *
reset
stop
user mode
start
power save
clear
ID
help
counter check
15.5.1.8.6 <TOUCHCHK>
Operation
15-120
T-15-191
Use it to check the keys.
1) Select [KEY CHK] so that the machine indicates the numbers/names of the input keys.
2) Press any key to check; if normal, the appropriate character will appear on the touch
panel. (See the table.)
3) Select [KEY CHK] once again to end the key input check.
T-15-192
Indication on screen
0 to 9, #, *
RESET
STOP
USER
START
STAND BY
CLEAR
ID
?
BILL
T-15-193
Use it to adjust the coordinates of the analog touch panel.
Match the points pressed on the touch panel and their corresponding
coordinates on the LCD.
Execute this service mode whenever you have replaced the LCD.
1) Select [TOUCHCHK] to highlight, and press the OK key.
2) Press the + symbols that appear on the touch panel at 9 locations in sequence
to complete the adjustment.
0005-6493
0005-6494