Canon iR C6800 Series Service Manual page 1139

15.4.1.5.9 <PTOFST M>
Method of
adjustment
Range of
adjustment
15.4.1.5.10 <PTOFST C>
Method of
adjustment
Range of
adjustment
15.4.1.5.11 <P SGNL Y>
Method of
adjustment
Range of
adjustment
15.4.1.5.12 <P SGNL M>
Method of
adjustment
Range of
adjustment
T-15-66
Use it to enter the correction value of the M laser output for ATR control.
if you have initialized the RAM on the DC controller PCB or replaced the
DC controller PCB, enter the value indicated on the service label.
48 to 48 (at time of shipment/upon RAM initialization: 0)
T-15-67
Use it to enter the correction value of the C laser output for ATR control.
if you have initialized the RAM on the DC controller or replaced the DC
controller PCB, enter the value indicated on the service label.
48 to 48 (at time of shipment/upon RAM initialization: 0)
T-15-68
Use it to adjust the density of toner on the intermediate transfer belt for
INIT execution (Y).
if you have initialized the RAM on the DC controller PCB or replaced the
DC controller PCB, enter the value indicated on the service label.
200 to 800 (at time of shipment/upon RAM initialization: 500)
T-15-69
Use it to adjust the density of toner on the intermediate transfer belt for INIT
execution (M).
if you have initialized the RAM on the DC controller PCB or replaced the
DC controller PCB, enter the value indicated on the service label.
200 to 800 (at time of shipment/upon RAM initialization: 500)
Chapter 15
0005-6838
0002-8311
0005-6841
0005-6843
15-75