R Con; Jam Hist; Err Hist; Pwd Clr - Canon iR C6800 Series Service Manual

Hide thumbs Also See for iR C6800 Series:

Table of Contents

15.5.1.10.4 <R CON>

15.5.1.10.5 <JAM HIST>

15.5.1.10.6 <ERR HIST>

15.5.1.10.7 <PWD CLR>

Use it to initialize the RAM on the reader controller PCB.

The contents of the RAM are initialized only when the main power switch has been

turned off and then on once again.

1) Obtain a printout of the service mode settings by making the following selections:

COPIER>FUNCTION>MISC P>P PRINT.

2) Select the item, and press the OK key.

3) Turn off and then on the main power.

4) As necessary, enter the data indicated on the printout obtained by [P PRINT].

Use it to reset the jam history.

The jam history is removed when the OK key is pressed.

1) Select the item, and press the OK key.

Use it to reset the error history.

The error history is removed when the OK key is pressed.

1) Select the item, and press the OK key.

Use it to initialize the password of the system administrator.

The password will not be initialized until the OK key is pressed.

1)Select the item, and press the OK key.

Chapters

Table of Contents