Replacing The Starter Of The Color Developing Unit - Canon iR C6800 Series Service Manual

Chapter 12
if for the M developing assembly,
COPIER>FUNCTION>INSTALL>INISET M
if for the C developing assembly,
COPIER>FUNCTION>INSTALL>INISET C
if for the CMY developing assemblies,
COPIER>FUNCTION>INSTALL>INISET 3
A countdown is shown on the screen while this
mode item is under way. At the end, the screen will
show "OK!".
This mode uses ATVC control, possibly taking a
while depending on the site environment. The count
on the screen, for this reason, may loop between 690
and 620.
16) Execute the following service mode item:
COPIER>FUNCTION>MISC P>P PRINT.
away the generated printout in the service book case.
(If there is a previous printout, dispose of it.)
17) End service mode, and start user mode; on the
Auto Gradation Correction screen, follow the
instructions to execute auto gradation correction
(full).
12-26
12.5.4 Replacing the Starter of the
Color Developing Unit
1) Remove the color developing unit.
2) Remove the screw [1], and free the 4 hooks [2];
then, detach the developing unit lid [3].
Store
F-12-39
3) On A3 paper or in a vinyl bag, dispose of the
contents of the unit by turning it over.
F-12-40
[1]
[3]
[2]
0004-0874