Canon iR C6800 Series Service Manual page 1328

Chapter 16
5) Click [OK] to start connection.
Service Support Tool DLM4 (ver.1.81En) Checking the Start
Selected Model and Unit
Model
"If the following preparations have been made, click [OK]."
""
"Turn off the machine."
"Connect the PC and the machine using a network cable."
"Turn on the machine, and start the download mode."
To Unit Selection
Screen
6) When the machine has made a connection and brings up the following screen, click [OK].
Service Support Tool DLM4 (ver.1.81En) Connecting to the Machine
Selected Model and Unit
Model
Connected Model and Unit
Model
List of Partition Names of the Hard Disk Drive
The information needed for the job has been obtained.
Check the indicated descriptions, and press [OK].
16-22
iR XXXX Unit HDFormat
Set host name
iR XXXX Unit HDFormat
iR XXXX Unit HDFormat
Partition
/ DOSDEV5
/ DOSDEV4
/ PDLDEV
/ DOSDEV3
/ FSTDEV
Connected to 172.16.1.100
F-16-27
Connected to 172.16.1.100
OK
F-16-28
OK