Canon iR C6800 Series Service Manual page 1073

Hide thumbs Also See for iR C6800 Series:

Table of Contents

15.2.1.2.8 <COINROBO>

Uses it to indicate the state of connection of a coin vendor.

0: not connected.

1: connected.

15.2.1.2.9 <NIB>

Use it to check the state of connection of a network board.

0: not connected.

1: Ethernet board connected.

2: TokenRing board connected.

3: Ethernet board and TokeRing board connected.

15.2.1.2.10 <NETWARE>

Use it to check the state of installation of network firmware.

0: not installed.

1: installed.

15.2.1.2.11 <SEND>

Use it to check the presence of the SEND function.

0: SEND function absent.

1: SEND function present.

15.2.1.3 ANALOG

15.2.1.3.1 Overview

Use it to check the measurements taken by analog sensors.

15.2.1.3.2 <TEMP>

Use it to check the machine inside temperature (environment sensor; in deg C).

15.2.1.3.3 <HUM>

Use it to check the machine inside humidity (environment sensor; in %RH).

15.2.1.3.4 <ABS HUM>

Use it to check moisture content (environment sensor; in g).

15.2.1.3.5 <FIX UC>

Use it to check the surface temperature of the middle of the fixing upper roller (as detected by the main thermistor;

Chapters

Table of Contents