Canon iR C6800 Series Service Manual page 1256

Chapter 15
<1ROT CR>
Attention
Settings
<1ROT TIM>
Attention
Settings
15-192
T-15-368
Use it to change the retention current for primary transfer retention
current idle rotation.
If the user disconnects the power plug at night and thus the drum heater
goes off, the temperature of the primary transfer roller is not likely to
match that of the drum when the power is turned on the next morning;
and the resulting temporary change in the resistance of the primary
transfer roller at times prevents proper execution of ATVC. If the level
of current set by default is not high enough, use this item to increase it.
The new setting will not be valid until the power switch has been turned
off and then on.
0: refer to environment sensor
1: 60uA
2: 70uA
3: 80uA
4: 90uA
5: 100uA
6: 110uA
7: 120uA
at time of shipment/upon RAM initialization: 0
T-15-369
Use it to change the duration of primary transfer power retention
current idle rotation.
The new setting will not be valid until the power has been turned off
and then on.
0: refer to the environment table.
1: 40sec
2: 60sec
3: 120sec
4: 180sec
5: 300sec
6: 420sec
7: 600sec
at time of shipment/upon RAM initialization: 0
0005-6820
0005-6824