Canon iR C6800 Series Service Manual page 1322

Chapter 16
12) Click [OK] so that the machine makes a connection.
Service Support Tool DLM4 (ver.1.81En) Checking the Start
Selected Model and Unit
Model
"If the following preparations have been made, click [OK]."
""
"Turn off the machine."
"Connect the PC and the machine using a network cable."
"Turn on the machine, and start the download mode."
13) When the machine has made a connection and brings up the following screen, click [OK].
Service Support Tool DLM4 (ver.1.81En) Connecting to the Machine
Selected Model and Unit
Model
Connected Model and Unit
Model
List of System Software for the Target of Connection
Language List for the Target of Connection
The information needed for the job has been obtained.
Check the indicated descriptions, and press [OK].
16-16
iR XXXX Unit
To Unit Selection
Screen
iR XXXX Unit
iR XXXX Unit
L a n g u a g e C o u n t r y / R e g i o n
Japanese Japan
L a n g u a g e C o u n t r y / R e g i o n
English
All
Connected to 172.16.1.100
Language
Set host name
F-16-19
Connected to 172.16.1.100
Language
Language
V e r s i o n S t a t e
01.25 A
V e r s i o n S t a t e
01.25 H
OK
F-16-20
OK