Removing The Outside Heating Roller Thermal Switch; Points To Note When Mounting The Outside Heating Roller Thermal Switch - Canon iR C6800 Series Service Manual

8) Holding the 2 grips [1], detach the fixing assembly
[2].
[2]
[1]
F-9-149
When lifting the fixing assembly, be sure to take
care not to touch the web length detecting arm [1] so
that the arm will be free of damage.
[1]
F-9-150
9.6.10.2 Removing the Outside Heating
Roller Thermal Switch
1) Remove the 2 screws [1], and detach the fixing
upper cover [2].
[1]
F-9-151
[1]
0003-0140
[2]
2) Remove the 2 screws [1], and free the 2 heater
harnesses [2].
3) Remove the screw [3], and detach the thermal
switch.
[1]
[2]
F-9-152
9.6.10.3 Points to Note When
Mounting the Outside Heating
Roller Thermal Switch
After mounting the thermal switch, check to be
sure of the following:
The surface of the thermal switch [1] must be parallel
to the outside heating roller. (Be sure to shine the
thermal witch switch a pen light.) If not, re mount it.
[1]
F-9-153
OK NG NG NG
F-9-154
Chapter 9
[4]
[3]
0004-5059
NG
9-49