Canon iR C6800 Series Service Manual page 1254

Hide thumbs Also See for iR C6800 Series:

Table of Contents

Use it to set the amount of toner to be deposited.

You can decrease the amount of toner, as when stray toner tends

to occur in full color mode or when paper tends to wrap around the

fixing roller.

0: standard amount (default)

1: decrease for both single sided and double sided modes

2: standard for single sided mode but decrease in double sided

mode for both 1st and 2nd sides (reserved)

at time of shipment/upon RAM initialization: 0

An update has been made to do away with setting 2 as a result of

recent findings (i.e., the expected operation does not take place in

some PDL or copy jobs; although the setting exists in service

mode, it behaves like 0).

Use it to set end edge correction for BkLUT for Tmic PDL and BkLUT

for Copy under Tmic.

0: PDL ON, Copy OFF PDL ON, Copy OFF [at time of shipment/after

RAM initialization]

1: PDL OFF, Copy OFF

2: PDL ON, Copy ON

3: PDL OFF, Copy ON

Use it to select patch image read data (high density side) for patch image

detection gradation correction (other than full correction).

0: use patch image read data used for patch image read data [at time of

shipment/after RAM initialization]

1: do not use patch image reading data used for full correction

Chapters

Table of Contents