Mounting Procedure; Communication Board (A956Wgot Only); Communication Board Types - Mitsubishi 900 Series User Manual

6 HANDLING

6.6 Communication Board (A956WGOT only)

6.6.1 Communication board types

6.6.2 Mounting procedure

6 - 14
The communication board is used to make the A956WGOT interface compatible with
the system to be connected to.
For the details of the connection form, refer to the [GOT-A900 Series User's Manual
(GT Works Version5/GT Designer Version5 compatible Connection System Manual)].
The following connection board types are available.
Type
A9GT-50WQBUSS For bus connection, small connector type (For QCPU (Q mode))
A9GT-50WBUSS For bus connection, small connector type (For A/QnA/Motion controller CPU)
For Direct connection to CPU/Computer link connection/Microcomputer connection
A9GT-50WRS4
and RS-422 connection
For Direct connection to CPU/Computer link connection/Microcomputer connection
A9GT-50WRS2
and RS-232C connection
a Insert the communication board
b Push down
Description
1) Open the slot cover on the back of the
A956WGOT.
2) Mount the communication board in the slot for
mounting a communication board.
(Align the hole for the attachment screw on the
transmission board with the hole for the
attachment screw on the transmission board of
the GOT main module, then attach.)
3) Fix by tightening the mounting screws of the
communication board within the specified torque
range.
4) Close the slot cover.
MELSEC-GOT
6 - 14