System Configuration; Overall Configuration - Mitsubishi 900 Series User Manual

2

SYSTEM CONFIGURATION

This chapter explains the system configuration of the GOT.

2.1 Overall Configuration

(1) Overall configuration of the A95*GOT
The overall configuration of the A95*GOT is shown below.
Communication cable/
module connected
For A950GOT
RS-422 cable 1
e.g. A30R4-25P
For A951GOT-Q
Bus cable for
QCPU(Q mode) 1
e.g. A9GT-QC150BS
For A951GOT
Bus cable 1
e.g. A8GT-C12NB
For A953GOT
RS-232C cable 1
Fabricated by
the user
For A956GOT
Communication
module
e.g. A9GT-Q71LP23
PC card
(Memory card)
Commercially
available
1 For details of the system configuration, refer to the [GOT-A900 Series User's Manual (Con-
*
nection System Manual)].
2 For details on the system configuration, refer to the User's Manual of each module.
*
3 The A95*GOT-SBD(-M3)-B, A95*GOT-QSBD(-M3)-B and A95*GOT-TBD(-M3) do not
*
require their backlights to be replaced since they are installed with long-life backlights.
Protective sheet
Debug stand
A9GT-50PSC
A9GT-50STAND
GOT
A95 GOT
Memory card cable External I/O module
A8GT-50KBF
A85GT-C05H
Memory card Numeric key panel
interface module 2 (e.g. key board)
A1SD59J-MIF e.g. A8GT-TK
Backlight 3
A9GT-50LT
Printer interface
1
module
2
A9GT-50PRF
Printer cable 1
2
e.g. AC30PI0-20P
2.1 Overall Configuration
Bar Code Reader 1
Commercially available
Personal computer
for drawing
Commercially available
Printer 1
Commercially
available
2 - 1
1
2
3
4
5
6
7
8