System Configuration; Overall Configuration - Mitsubishi 900 Series User Manual

2 SYSTEM CONFIGURATION

2 SYSTEM CONFIGURATION
This chapter explains the system configuration of the GOT.

2.1 Overall Configuration

(1) Overall configuration of the A95 GOT
Communication cable/
module connected
For A950GOT
RS-422 cable 1
e.g. A30R4-25P
For A951GOT-Q
Bus cable for
QCPU(Q mode) 1
e.g. A9GT-QC150BS
For A951GOT
Bus cable 1
e.g. A8GT-C12NB
For A953GOT
RS-232C cable 1
Fabricated by
the user
For A956GOT
Communication
module
e.g. A7GT-J71AP23
PC card
(Memory card)
Commercially
available
(Compliant with
PCMCIA Ver.2.1)
1 For details of the system configuration, refer to the [GOT-A900 Series User's Manual (GT Works
Version5/GT Designer Version5 compatible Connection System Manual)].
2 For details of the system configuration, refer to the [GT Works Version5/GT Designer Version5 Reference
Manual].
3 For details on the system configuration, refer to the User's Manual of each module.
2 - 1
The overall configuration of the A95 GOT is shown below.
Protective sheet
Debug stand
A9GT-50PSC A9GT-50STAND
GOT
A95 GOT
Memory card cable External I/O module
A8GT-50KBF
A85GT-C05H
Memory card Numeric key panel
(e.g. key board)
interface module 3
A1SD59J-MIF e.g. A8GT-TK
Backlight
A9GT-50LT
Printer interface
module 1
3
A9GT-50PRF
Printer cable 1
3
e.g. AC30PI0-20P
MELSEC-GOT
Bar Code Reader 1
OPT-5125-RS232C(H)
Personal computer
for drawing 2
Commercially available
Printer 1
Commercially
available
2 - 1
2