Setting Of Serial Multi-Drop Connection Unit; Write The Os; Setting Communication Interface (Communication Settings) - Mitsubishi GOT2000 Series Connection Manual

18.6 Setting of Serial Multi-Drop Connection Unit

18.6.1 Write the OS

Write the standard monitor OS and communication
driver according to the desired connection type onto the
serial multi-drop connection unit.
For the OS writing methods, refer to the following
manual.
GT Designer3 Version1 Screen design manual
1.
Check-mark a communication driver according to the
desired connection type and click the [Write] button.
18 - 18
18. GOT MULTI-DROP CONNECTION
18.6 Setting of Serial Multi-Drop Connection Unit
1.
Click!
18.6.2 Setting communication
interface (Communication
settings)
Make the Serial Multi-Drop Connection Unit interface
setting on [Communication with GT01-RS4-M] of GT
Designer 3.
For the communication interface driver, set the same
communication driver as the serial multi-drop
connection.
For details on [Communication with GT01-RS4-M] of
GT Designer3, refer to the manuals.
GT Designer3 Version1 Screen design manual