1.5 Verifying GOT Recognizes Connected Equipment
Verify the GOT recognizes controllers on [Communication Settings] of the Utility.
• Channel number of communication interface, communication drivers allocation status
• Communication unit installation status
For details on the Utility, refer to the following manual.
When using GT16
1.
2.
1 - 28
1. PREPARATORY PROCEDURES FOR MONITORING
1.5 Verifying GOT Recognizes Connected Equipment
GT
User's Manual
3.
1.
After powering up the GOT, touch [Main menu]
[Communication setting] from the Utility.
2.
The [Communication Settings] appears.
3.
Verify that the communication driver name to
be used is displayed in the communication
interface box to be used.
4.
When the communication driver name is not
displayed normally, carry out the following
procedure again.
1.1Setting the Communication Interface