Toshiba e-STUDIO206L Service Manual page 1410

Sub
05/08 Mode Element
element
08 Setting Counter Maintenan PM counter
mode ce
08 Setting Counter Maintenan PM drive counter
mode ce
08 Setting Counter Maintenan
mode ce
08 Setting Counter Counter
mode
08 Setting Counter Counter
mode
08 Setting Counter Counter
mode
08 Setting Counter Counter
mode
08 Setting Counter Feeding Feeding retry counter
mode system/Pa
per
transport
08 Setting Counter Feeding Feeding retry counter
mode system/Pa
per
transport
08 Setting Counter Feeding Feeding retry counter
mode system/Pa
per
transport
08 Setting Counter Feeding Feeding retry counter
mode system/Pa
per
transport
e-STUDIO207L/257/307/357/457/507
Item Subitem Code
K 6194
K 6195
6198
6225
6226
6227
6228
6230
6231
6232
6233
Sub- Default Acceptable
Details
code value value
Current value 0 8 digits
Current value 0 8 digits
Switching of output 0 0~2
pages/ driving counts
at K-PM
Number of output 0 8 digits
pages(Thick paper 1)
Number of output 0 8 digits
pages(Thick paper 2)
Number of output 0 8 digits
pages(Thick paper 3)
Number of output 0 8 digits
pages (OHP film)
Upper drawer 0 8 digits
Lower drawer 0 8 digits
PFP upper drawer 0 8 digits
PFP lower drawer 0 8 digits
67
RAM Contents
M Counts up when the registration sensor is ON.
M Counts the drum driving time.
M Selects the reference to notify the PM timing. (The
message is displayed on the LCD screen.)
0: PM counter (The number of output pages is set at
08-6190.)
1: PM time counter (The timing is set at 08-6191.)
2: Whichever comes faster
M Counts up when the registration sensor is ON. When
the counter value of the fuser roller is cleared, this
counter value is also cleared in sync at the PM support
mode.
M Counts up when the registration sensor is ON. When
the counter value of the fuser roller is cleared, this
counter value is also cleared in sync at PM support
mode.
M Counts up when the registration sensor is ON. When
the counter value of the fuser roller is cleared, this
counter value is also cleared in sync at PM support
mode.
M Counts up when the registration sensor is ON. When
the counter value of the fuser roller is cleared, this
counter value is also cleared in sync at PM support
mode.
M Counts the number of times of the feeding retry from
the upper drawer.
M Counts the number of times of the feeding retry from
the lower drawer.
M Counts the number of times of the feeding retry from
the PFP upper drawer.
M Counts the number of times of the feeding retry from
the PFP lower drawer.
Proc Service
edure UI
1 Yes
1 Yes
1
1
1
1
1
1 Yes
1 Yes
1 Yes
1 Yes