Administering Processor Ethernet (S8300, S8400, Or S8500 Server Only) - Avaya IG550 Installing And Configuring

Administering Processor Ethernet (S8300, S8400, or S8500 Server
only)
Note:
This should have already been established as a part of normal S8300 Server
Note:
installation, and may also be administered for an S8400 or S8500 Server.
1. Type change ip-interfaces procr to open the IP Interfaces screen.
change ip-interfaces procr
Enable Ethernet Port? y
2. Complete the fields as described the in
Table 2: IP interfaces field descriptions
Field
Type
Node name
IP Address
Type: PROCR
Node Name: procr
IP Address: 135.9.41.146
Subnet Mask: 255.255.255.0
Nework Region: 1
Target socket load: 1700
Display only. PROCR
The unique node name for the IP interface. procr is the
default node name. The node name here must already
be administered on the Node Names screen.
The IP address (on the customer LAN) of the Processor
Ethernet.
IP INTERFACES
Allow H.323 Endpoints? y
Allow H.248 Gateways? y
Gatekeeper Priority: 5
Table 2.
Conditions/Comments
Page 1 of 1
1 of 2
Issue 2 January 2008 145