Settings For Modem Connected To Data Module; Settings For Modem Connected To The Data Terminal Equipment (Dte); Add Integrated Announcements/Tn2501Ap; Replacing A Tn750/B/C Circuit Pack - Avaya CMC1 Installation Manual

Adding or Removing Hardware

Add Integrated Announcements/TN2501AP

Settings for Modem Connected to Data Module

1
Type add data-module next and press Enter.
2
Type pdm in the
3
Type x in the
4
Type dte in the
5
Type add station next and press Enter.
6
Type 2500 in the
7
Type x in the
8
Type n in the
9
Type add modem-pool next and press Enter.
10
Type combined in the
11
Type 5 in the
12
Type two-way in the
13
Type 9600 in the
14
Type Full in the
15
Type async in the
16
Type the port pair assignments in the
Settings for Modem Connected to the Data
Terminal Equipment (DTE)
1
Type add station next and press Enter.
2
Type 2500 in the
3
Type the port assignment in the
Add Integrated Announcements/TN2501AP

Replacing a TN750/B/C circuit pack

If you are replacing a TN750C announcement circuit pack with the new TN2501AP:
•
get a list and description of the announcements stored on the TN750C circuit pack.
•
re-record the announcements on a computer or at a professional recording studio as .wav files
(CCITT -Law or A-Law, 8KHz, 8-bit mono), so that they are ready to transfer to the new
announcement circuit pack after it is installed and administered. See
Specifications.
218
field.
Type
field.
Port
field and press Enter.
Connected to
field.
Type
field.
Port
field and press Enter.
Tests
field.
Group Type
field.
Hold Time (min)
field.
Direction
field.
Speed
field.
Duplex
field.
Synchronization
Analog
field.
Type
field and press Enter.
Port
Installation, Upgrades and Additions for Avaya CMC1 Media Gateways
and fields and press Enter.
Digital
Announcement File
June 2004