Add Ds1 Tie And Ops; Service Interruption - Avaya CMC1 Installation Manual

Adding or Removing Hardware

Add DS1 Tie and OPS

Table 55: Tie Trunk Option-Switch Settings and Administration
Installation Situation
Circumstance To
Collocated Avaya
CMC1
Media
Gateway
Inter-Building Avaya
CMC1
Media
Gateway
Collocated Net
Integrated
Add DS1 Tie and OPS
The TN2313AP DS1 Tie Trunk and TN767B (or later) DS1 Interface circuit packs provide connections to
a 1.544 Mbps DS1 facility (T1) as 24 independent
64 Kbps trunks.
The TN2313AP DS1 Tie Trunk, TN767B (or later) DS1 Interface, and TN464C (or later) DS1 Interface
circuit packs provide connections to a 2.048 Mbps DS1 facility (E1) as 32 independent 64-kbps trunks.

Service Interruption

1
Since the addition of DS1 tie-trunk service may require a service interruption, notify the customer
in advance as to when the addition will occur.
2
For information about administering DS1 Tie Trunks, refer to Administrator's Guide for Avaya
Communication Manager.
216
Preferred Signaling
Format
System Far-End
E&M Type E&M
1 Type 1
Compatible Standard
Protected Protected
Type 1 Type 1
Compatible Standard
Plus
Protection
Unit
E&M Type Any PBX
1
Standard
Installation, Upgrades and Additions for Avaya CMC1 Media Gateways
E&M/SMPLX Prot/Unprot
Switch Switch
E&M Unprotected
E&M Protected
E&M Unprotected
Administered
Port
Type 1
Compatible
Type 1
Compatible
Type 1
June 2004