Check Spe; Verify Software Version; Verify System Status; Disable Scheduled Maintenance And Alarm Origination To Inads - Avaya CMC1 Installation Manual

Upgrading R6csi/R7csi/R8csi to Avaya Communication Manager on an Avaya DEFINITY Server CSI

Check SPE

Type status system 1 and press Enter to check the health of the system.

Verify Software Version

1
Type list configuration software-version and press Enter. Under the
note whether a patch has been applied.
NOTE:
If the system must be restored to the old version, this patch must be downloaded onto the
system.

Verify System Status

1
Type display alarms and press Enter. If the system is not alarm-free, take the needed corrective
actions.
2
Type display errors and press Enter. Examine the error log and record the error 18s that identify
the busy-outs placed by the customer.
Restore the customer-placed busy-outs after you have upgraded the system.
3
Execute the following commands and verify that the information is correct:
list station
list trunk-group
list hunt-group
list data-module
list announcements
If any command does not complete successfully, escalate the problem immediately.
Disable Scheduled Maintenance and Alarm
Origination to INADS
1
Type change system-parameters maintenance and press Enter.
2
If scheduled maintenance has begun, set the
or
If scheduled maintenance has not begun, set the
will be completed. For example, if you start the upgrade at 8:00 p.m. and the upgrade takes 90
minutes, set the
CAUTION:
If you do not disable Alarm Origination, the system may generate alarms, resulting in
unnecessary trouble tickets.
Installation, Upgrades and Additions for Avaya CMC1 Media Gateways
June 2004
field to 21:30.
Start Time
UPDATE FILE
field to 1 minute after the current time.
Stop Time
field to a time after the upgrade
Start Time
Task Table
column,
165