Installing and wiring telephones and trunks
Installing and wiring telephones and trunks
The wiring procedures are the same for most Avaya telephones and other equipment.
This task list provides wiring examples of similar installation procedures. These are examples only;
actual wiring procedures may vary at each site.
After installing the equipment, the data for the telephone features must be administered. These
procedures are provided in the Administrator's Guide for the Avaya Communication Manager or with the
specific telephone or console.
Wiring telephones and trunks
This section includes the following wiring examples and wiring procedures:
•
Connecting telephones
•
Analog tie trunk example
•
Digital tie trunk example
•
DS1 tie trunk example
•
Auxiliary connector outputs (MCC1 and Media Gateways only)
•
Three-pair and four-pair modularity
•
Adjunct power connection locations
•
Attendant console example
•
Connecting external alarm indicators and auxiliary power
•
Connect Power Distribution Unit External Alarm Wires
•
Installing off-premises station wiring
•
Off-premises or out-of-building stations
•
Off-premises connections
•
Emergency transfer units and associated telephones
•
808A Emergency Transfer Panel and telephone installation examples
•
Installing external ringing
•
Installing the queue warning indicator
See the Job Aid entitled
pinouts.
232
NOTE:
See the Installation for Adjuncts and Peripherals for Avaya Communication Manager to
install the necessary peripheral equipment.
on page 233
on page 237
on page 238
on page 239
on page 247
on page 253
on page 265
Connector and Cable Diagrams (Pinout Charts)
Installing the Avaya S8500 Media Server with an Avaya G650 Media Gateway
on page 245
on page 246
on page 248
on page 250
on page 252
on page 253
on page 258
on page 266
on page 242
on page 259
for information on
December 2003