Installation Location - Avaya Aura G450 Installation, Quick Start

Introduction
This document contains the information that you require to start using your Communication
Manager Branch G450 Media Gateway in the shortest possible time.
1. Check
2. Mount
3. Install Media Modules.
4. Ground
5. Connect
network.
6. Turn on
7. Configure
Congratulations! You are now ready to use your Communication Manager Branch G450 Media
Gateway.
Check
Safety
Before you start the installation, see the following safety information
Grounding. See
●
Rack mounting. See
●
Gateway in a rack" on page

Installation Location

When deciding where to position the Communication Manager Branch G450 Media Gateway,
ensure that:
It is accessible and you can connect cables easily.
●
Cables are away from sources of electrical noise such as radio transmitters, broadcast
●
amplifiers, power lines, fluorescent light fixtures.
before you install your Communication Manager Branch.
your Communication Manager Branch.
your Communication Manager Branch.
your Communication Manager Branch to your telephones, computers, and
your Communication Manager Branch G450 Media Gateway.
Point your Web browser to https://192.11.13.6.
General grounding requirements
"Mounting your Communication Manager Branch G450 Media
5.
on page 12.
Issue 1 May 2009 1