Upgrading 4620 Ip Phones Example - Avaya G250 Installing And Upgrading

Upgrading 4620 IP phones example

If the 4602SW and 4602D phones have just been upgraded, the script files are not copied for
this upgrade, since they are already stored in NVRAM.
1. Disable the TFTP server while copying new files to the device, using the [no] ip
tftp-server command.
G250-001(super)# no ip tftp-server
Done!
2. Copy the boot image files for the 4620 IP phone using the copy ftp phone-image
command.
G250-001(super)# copy ftp phone-imageA pub\bbla20_1817.bin 192.168.49.10
Username: root
Password:
Beginning download operation ...
This operation may take up to 20 seconds.
Please refrain from any other operation during this time.
For more information , use 'show download phone-image-file status'
command
3. Copy the phone image files for the 4620 IP phone using the copy ftp phone-image
command.
G250-001(super)# copy ftp phone-imageB pub\def20r1_8_1.bin 192.168.49.10
Username: root
Password:
Beginning download operation ...
This operation may take up to 20 seconds.
Please refrain from any other operation during this time.
For more information , use 'show download phone-image-file status'
command
4. Enable the TFTP server to allow the IP phones to load the new files using the ip tftp
server command.
G250-001(super)# ip tftp server
Done!
Upgrading 4620 IP phones example
Issue 6 November 2009 87