Online Help
General online help is available through the main Help link
located in the top WebView banner:
Detailed, context-based help is provided for each status table
and configuration dialog window:
Additional Information
For more information on using WebView, refer to "Using
WebView" in the OmniSwitch 6600 Family Switch Manage-
ment Guide.
60
Using WebView
General Help Link
Context-specific Help
button.
(In this case, for the VLAN
Administration table.)
Troubleshooting
The WebView login screen does not display.
This suggests either a physical or network connection issue.
Try the following options:
Be sure that you have a good physical Ethernet cable
•
connection to the switch.
Be sure your computer has a valid Ethernet connection
•
and IP address.
Verify that all required WebView image files are
•
installed in the current running directory. See
more information.
The login screen displays, but my login attempt
fails.
This suggests either a user name and password or Authenti-
cated Switch Access error. Try the following options:
Check that you are using the correct user name and
•
password. If you have already changed the user name and
password for your switch, be sure to use the new informa-
tion. If you have not changed the user name and password,
the factory defaults are admin and switch, respectively.
Be sure that you have "unlocked" HTTP sessions on the
•
switch. To unlock HTTP sessions, enter the following
command:
-> aaa authentication http local
See
page 34
for information on unlocking session types.
page 57
for
March 2005