Omniswitch 6400 Series Hardware Users Guide July 2010; Omniswitch 6400-P48 Rear Panel - Alcatel OS6400-48 Hardware User's Manual

OmniSwitch 6400 Series Chassis Configurations

OmniSwitch 6400-P48 Rear Panel

Note. The figure shows a pre-production version of the chassis without product, safety, and compliance
information labels. All production versions of the chassis have these labels.
B
Item Description
A Primary PS1 Power Supply Connector
DB-25 connector for required external primary power supply.
B Redundant PS2 Power Supply Connector
DB-25 connector for optional external redundant power supply.
C Grounding Block
Type LCD8-10A-L grounding lug
D Stacking/Uplink LEDs
Provides link or traffic status for stacking/uplink connectors. Refer to
Indicators" on page 2-20
E Stacking/Uplink Connectors
Connectors for use in stacking switches into a virtual chassis or as an uplink port
Note . The rear panel of the OS6400-P48 contains three DB-25 power supply connectors for connecting
external 360W and 510W power supplies. One of the connectors is labeled 'Primary PS1' and two of the
connectors are labeled 'Backup PS2'. The primary power supply must be connected to the 'Primary PS1'
connector. A redundant power supply can be connected to either of the 'Backup PS2' connectors.
page 2-18
OmniSwitch 6400 Series Chassis and Hardware Components
A
OS6400-P48 Rear Panel
for LED status information.
OmniSwitch 6400 Series Hardware Users Guide
B C
D
E
"LED Status
July 2010