Setting Areas; Composite Read From Variable Area - Omron E5AR-T User Manual

Response

■ Composite Read from Variable Area

Command
Variable
Address
type
"0000" to "003B"
"CC"
"CD"
"CE"
"0100" to "013B"
"CF"
"D0"
"0200" to "023B"
"D1"
"D2"
"D3"
"0300" to "033B"
This command is used to read set values. The number of elements
can be set from 0002 to 0019 to allow reading 2 to 25 set values in
consecutive addresses.
To specify variable types and addresses, refer to Appendix Setting
Lists (P. A-6). The upper limit of an address depends on the variable
type.
This command can be used in both setting area 0 and setting area 1.
When used in setting area 1, the response for the remote SP monitor,
ramp SP monitor, and valve opening monitor will be 0 and the
response for the status is as indicated in the notes in E5@R-T Status
(Communications) (P. A-8).
MRC SRC Response code
"01" "01" "0000"
Response Codes:
The response for a normal end is shown above. For the
response codes, refer to 6.5 Read from Variable Area (P. 6-10).
Variable
MRC SRC type Address
"01" "04"
Variable
Address
type
"0000" to "0008"
"0100" to "0108"
"C4"
"0200" to "0208"
"0300" to "0308"
6.9 Commands and Responses
Parameters
Ch Description
1 Parameters in Setting Area 1
Input Initial Setting Level
Control Initial Setting Level
2
Control Initial Setting 2 Level
Alarm Setting Level
Display Adjustment Level
3
Communications Setting Level
Advanced Function Setting Level
4
Expansion Control Setting Level
Data
Set value
Variable
Bit position type Address
"00"
Variable type Address
Parameters
Ch Description
1
2
Monitor values
3
4
Bit position
"00"
Bit position
"00"
6-19